|
|
 The
3D Graving Light Panel Slim
Light Box |
|
|
|
The 3D graving light panel product is
able to compare the beauty with the same range of products
in foreign countries. It is based on the optics theory that
precision machineries can be made into network ditches of
different width on the high polymer organic materials, and
then the side optical source will have light effect such as
refraction, reflection and widespread reflection among the
netting twines in order to transfer the linearity optical
source into flat source. |
 |
|
Single Side Slim Light Box |
|
The Structure of the Product： |
 |
The Criterion of the luminosity and evenness：
Comply with the criterion of brightness and evenness of the
advertisement light box totally. The brightness and evenness
of each dimension of the AOTO 3D light panel is ensured,
even the evenness of the panel width of 1.2 meter is not
lower than 70%. And the average luminosity of 35 watt T4
strip lamp will reach minimum 1200LUX.
Dimension of the Light panel：
100% of panels of different thickness should be
made-to–order. Based on the self–owned
multi-production-lines manufacture ability, our light boards
could meet the customers' requirement of the time of the
delivery even in the mode of made-to-order.
Backing of Acryl Glass：
Because the technical performance of the panel depends on the
backing nature of 3D light panel such as luminousness,
heat-resistant and resistance to chemical deterioration. We
are very strict with the selection of backing. 3D AOTO light
board is totally made of “ RYLONG” optically acryl glass in
Taiwan. The luminousness of the product reaches 93% and it
will not be lower than 85% after 5 years insolation outside. |
|
|
| |
|
|
|
|
